Photocopier and Printer Disposal

Guide · Businesses · 4 min read · Updated 16 November 2026

End of Lease Photocopier: What Happens to the Old Machine?

Short answer

At the end of a photocopier lease, the machine usually still belongs to the finance company. Your options are typically to return it, extend the lease, buy it for a nominal or agreed sum, or trade it in against a new machine. Whatever happens, wipe or destroy the internal storage first, because the data on it is still your responsibility. Only dispose of a copier yourself once you own it.

An open-plan office with rows of desks

Who owns the copier?

Most office copiers are supplied on a lease through a finance company, often with a separate service contract with the dealer that covers toner, parts and engineer visits. The finance company owns the machine throughout. At the end of the minimum term, the agreement usually continues on a rolling basis until you give notice, so missing the notice window can mean paying for months longer than you expected. Read the agreement for the notice period, the return arrangements and any charges for collection. If you own the machine outright, either because you bought it or because the lease transferred title, you are free to sell, recycle or dispose of it.

Pay attention to any clause about the condition of the machine on return. Some agreements expect it to be returned in working order with all trays and finishers present, and charge for missing parts. Others require it to be packed or ready for collection at a ground-floor point. Knowing this in advance avoids surprise charges after the machine has gone.

Your options compared

The right choice depends on the age of the machine, your print volumes and whether you are replacing it. A modern machine with a low meter count may be worth keeping or buying out. An older colour copier facing an expensive drum and fuser replacement is usually best returned or recycled. Get the settlement and buy-out figures in writing before deciding, as they vary between finance companies and agreements.

OptionWhen it makes senseWatch out for
Return to the lessorYou no longer need the machine or are changing supplierCollection charges, notice periods and data handling
Extend or roll overMachine works well and volumes are steadyPaying full rental on an ageing machine
Buy outYou want to keep it or dispose of it yourselfService support may end; check parts availability
Trade in with new leaseReplacing with a new copier from the same dealerSettlement figures rolled into the new agreement

Data: still your responsibility

Returning a machine does not hand over your data duties. Copier storage can hold images of documents that passed through it, and under UK GDPR your organisation must keep personal data secure. Before a leased machine is collected, ask the supplier exactly how they will treat the drive, whether it will be overwritten or removed, and whether you will receive written confirmation with the serial number. Some businesses pay to have the drive removed and destroyed before handing the machine back. Check the lease first, because removing parts from a machine you do not own may breach the agreement. Many suppliers will agree if asked in advance, and some offer a replacement drive or data security service.

Remember smaller devices on the same agreement. Leases often bundle an A3 copier with A4 printers in other rooms, and each of those may have storage too. Apply the same data steps to every device listed on the schedule, not just the main machine. Small devices are easily missed because they sit in back offices or branches, so check each one against the lease schedule before collection.

If you own it: disposal checklist

Once the copier is yours, treat it like any other business electrical waste. The steps below keep you on the right side of both data protection and waste law, and make the collection quicker on the day. Work through it in order, ideally starting a week or two before the collection date so nothing is rushed on the day. Keep a copy of the list.

  • Confirm in writing that title has passed to your business
  • Run the manufacturer's data overwrite, then arrange drive removal and destruction
  • Remove toner, staples and spare paper, and bag spare cartridges for collection
  • Clear the route to the exit and check lift dimensions
  • Use a registered waste carrier and keep the waste transfer note for at least two years
  • File the drive destruction record with the machine's serial number

When buying out makes sense

Buying out a copier can be good value if it is reliable, the meter count is modest and you have a source of toner and service at a sensible price. It can also be the cleanest way to deal with data, because once you own the machine you can remove and destroy the drive yourself without asking permission. The downside is that support from the original dealer may end, and parts for older models become harder to find. If the buy-out figure is low and you plan to scrap the machine anyway, compare it with the cost of having the dealer collect and the data procedure they offer. Sometimes paying a small buy-out and arranging your own collection with drive destruction gives you more control for a similar overall cost.

Planning the timing

Give notice to the finance company within the window stated in your agreement, often several months before the end of term, and keep proof that you did. Line up any replacement machine, data handling and collection so the old copier is not left in a corridor for weeks. If you are moving offices, it is often easier to dispose of or return the old machine before the move than to pay to relocate it. Where several copiers come off lease together, one planned collection with drive destruction for each machine is the most efficient route.

It also helps to check the final meter reading before collection. Many service contracts bill by the page, and a final reading agreed with the dealer prevents disputes over the closing invoice. Photograph the meter display and the serial plate on the day the machine leaves, and file the photographs with the return note and the data destruction record. Those simple records settle most later questions.

Questions people also ask

Can I throw away a leased copier?

No. A leased copier normally belongs to the finance company, so disposing of it without permission could leave you liable for its value. Contact the lessor or dealer to arrange return or buy-out first. Once title has passed to you in writing, you can recycle it through a registered waste carrier.

Does the leasing company wipe the hard drive?

Many suppliers have a data procedure, but it varies, and the legal responsibility for personal data stays with your organisation. Ask what method they use, whether the drive is removed or overwritten, and request written confirmation linked to the machine's serial number. If in doubt, arrange removal and destruction before return, with the lessor's agreement.

What if I miss the lease notice period?

Many copier leases roll on automatically at the same rental if notice is not given in time, sometimes for a set extra period. Check the wording of your agreement and give written notice as soon as possible. Keep a record of when you sent it, and ask for written acknowledgement.

Written and checked by the Photocopier and Printer Disposal team. Read our editorial policy.

Get a free photocopier and printer disposal quote

Tell us what you need and we'll come back with a clear price.

Request a quote