Guide · Businesses · 4 min read · Updated 16 November 2026
How to Wipe a Photocopier Hard Drive Before Disposal
Short answer
Most modern multifunction copiers contain a hard drive or solid-state drive that can hold copies of scanned, printed and faxed documents, address books and network settings. Before disposal, run the manufacturer's data overwrite or initialisation function, then have the drive removed and physically destroyed, or overwritten to a recognised standard by a specialist. Keep a record of the machine and drive serial numbers and the method used.
Why copiers hold sensitive data
A multifunction device is effectively a networked computer with a scanner and print engine attached. To collate long jobs, store scan-to-email files, hold secure print jobs and keep fax logs, many machines write images of documents to internal storage. Depending on the model and settings, that storage can retain payroll runs, contracts, medical letters, passport scans and anything else that passed through the machine, along with email address books and network credentials. Under UK GDPR and the Data Protection Act 2018, an organisation must keep personal data secure. That duty does not end when a machine is unplugged. If a copier leaves your premises with readable data on it, you remain responsible.
Copiers are also often moved between departments or sites during their life, so a single machine can hold data from several teams. Treat every multifunction device as though it holds your most sensitive documents, because at some point it probably did. That mindset makes the preparation steps below routine rather than optional. It also means involving IT early, because they know which machines are on the network and what they were used for.
Which machines have storage?
Almost all floor-standing A3 multifunction copiers from the last two decades have a hard disk drive or, increasingly, a solid-state drive or eMMC chip. Many A4 MFDs have storage too, especially those with secure print or document box features. Basic desktop printers usually have only volatile memory that clears when the power is removed, though some business laser printers have optional drives fitted. If you are unsure, check the model's specification sheet for terms such as HDD, SSD or storage, or look for a data security kit listed as an option.
| Device type | Storage likely? | Recommended action |
|---|---|---|
| Floor-standing A3 MFD | Yes, almost always | Overwrite, then remove and destroy drive |
| A4 MFD with secure print | Often | Check specification, overwrite and remove if present |
| Basic desktop laser or inkjet | Rarely | Clear stored settings and Wi-Fi details |
| Wide-format plotter | Often | Remove or wipe drive used for job queues |
| Fax machine | Memory only, sometimes | Clear stored numbers and logs |
Step by step: preparing a copier for disposal
Work through these steps before collection day. If the machine is leased or under a service contract, involve your supplier, as they may have an end-of-life data procedure and may hold the administrator password. Allow a little time for this, because tracking down admin passwords and service contacts is often the slowest part. Note who did each step.
- Record the make, model and serial number from the label on the machine
- Delete stored address books, user boxes and secure print jobs from the admin menu
- Run the built-in data overwrite or factory initialisation function if the model has one
- Remove any network or cloud print account links and change shared passwords the machine used
- Arrange for the drive to be physically removed and destroyed or securely overwritten
- File a record showing the serial numbers, method used and date
Overwriting versus physical destruction
Software overwriting replaces stored data with patterns so it cannot be read back. The built-in overwrite on many copiers is a sensible first step, but it relies on the machine working and on the function covering all storage areas. Solid-state storage is harder to sanitise reliably by overwriting because of how flash memory spreads data across cells. Physical destruction removes the doubt. The drive is taken out and shredded, crushed or drilled through its platters or memory chips so it cannot be reused. For most businesses, removing and destroying the drive is the simplest way to show that data was dealt with properly, particularly where the machine is going for recycling rather than resale.
Whichever method you choose, keep control of the machine until the data step is done. Avoid leaving a copier with its drive in a loading bay or corridor for days before collection. If the drive is being destroyed off site, ask how it is transported and how long it will be held before destruction, and make sure the record you receive names the drive by its serial number rather than simply saying the work was done.
Common mistakes to avoid
The most frequent problem is assuming someone else has dealt with it. Facilities teams assume IT has wiped the copier, IT assume the supplier will, and the supplier assumes the customer already has. Agree in writing who is responsible for each machine. The second mistake is forgetting smaller devices: A4 MFDs in branch offices, scanners with document storage and plotters in drawing offices are easy to overlook. The third is relying on a reset alone on a machine whose overwrite function has never been switched on. Finally, do not forget the address book. Even if document images are gone, a list of staff and client email addresses is itself personal data and should be cleared.
What paperwork to keep
Keep a record that ties each machine to its storage and to what was done with it. Ideally that means the copier serial number, the drive serial number, the destruction or wiping method and the date. Alongside that, keep the waste transfer note for the equipment itself, which the duty of care under the Environmental Protection Act 1990 requires businesses to keep for at least two years. Together, these show that both your data duties and your waste duties were met if anyone asks later, whether that is an auditor, a client or the Information Commissioner's Office.
Questions people also ask
Does a factory reset delete everything on a copier?
Not always. A factory reset or initialisation may restore settings without fully overwriting stored document images, and on some models it only clears user-facing data. Use the manufacturer's dedicated data overwrite function if available, and for certainty have the drive removed and physically destroyed before the machine leaves your control.
Can I remove the copier hard drive myself?
It is possible on some models, but drives are often behind panels near the controller board and power supply, and removing them can be fiddly. If the machine is leased, removing parts may breach the agreement. Most businesses prefer a technician or disposal team to remove it, record the serial and destroy it.
Do home printers need wiping?
Most home inkjets and lasers have no long-term document storage, but they may hold Wi-Fi passwords, email settings and recent fax numbers. Use the printer's restore defaults option to clear these before passing it on or recycling it. If it is a business-grade machine used from home, check whether it has a drive.
Written and checked by the Photocopier and Printer Disposal team. Read our editorial policy.
More guides
How Much Does Photocopier Disposal Cost in the UK?
In the UK, collecting a desktop printer or A4 multifunction device costs from £20, while removing a floor-standing A3 copier typically costs…
Photocopier and Printer Disposal Rules in the UK
Photocopiers and printers are electrical equipment under the WEEE Regulations 2013, so they must be treated at an authorised facility, not…
End of Lease Photocopier: What Happens to the Old Machine?
At the end of a photocopier lease, the machine usually still belongs to the finance company. Your options are typically to return it, extend the…
Office Copier and Printer Removal: Preparation Checklist
Before copiers and printers are collected, list every machine with its model and serial number, deal with the internal storage, remove toner and…
Printers, Copiers and GDPR: Protecting Data When You Dispose
Many office copiers and multifunction printers store copies of scanned, printed and faxed documents on internal hard drives or memory, plus address…
Toner and Ink Cartridge Recycling for Offices: What to Do
Offices should recycle used toner cartridges, ink cartridges, waste toner bottles and imaging drums rather than putting them in general waste. Many…
Get a free photocopier and printer disposal quote
Tell us what you need and we'll come back with a clear price.
Request a quote